Durgamba Build Solutions Co.

1. Micro Concrete - Hard Worker Micro Concrete HW401

   Where repairs by structural wrapping and jacketing is the only option for concrete, Hard Worker Micro Concrete steps in with certainty. Its high-strength, self-compacting mix flows into tight spaces and holds its shape without vibration or layering. Just add water, mix and pour. It bonds with old concrete, builds strength fast for rapid repairs that don’t just fill thin areas, but restores trust.

   Applications

   • ●  Repair of damaged reinforced concrete elements, such as beams, columns and walls, where

     access is limited and compaction is challenging.

   • ●  Jacketing of RCC columns to enhance load capacity.

   • ●  Rapid repair projects.

   • ●  Overlay for existing surfaces in rehabilitation projects to enhance durability and aesthetics.

● Available variants are 40 MPa, 60 MPa and 80 MPa. Packaging : 25Kgs

Waterproofing Coat - Hard Worker Waterproofing Coat HW103

Zero seepage. Zero cracks. Any construction is subject to climatic changes and is prone to the stress from expansion and contraction. Hard Worker Waterproofing Coat is a dual component formulation that is flexible under stress. It grips through temperature shifts, and forms a durable, watertight membrane thatstays on. Applied on the side from which water enters, the product stops ingress at the source, whether it is roofs, wet areas, walls, water tanks or basements. With just a thin layer that has high spread, it saves cost while delivering waterproofing that ensures structural integrity for years.

Applications

• ●  Ideal for Water Storage, Water tanks, Sunken areas, Wastewater tanks.

• ●  Exposed Areas - Terraces, Balconies, Sunshades.

• ●  Structural Protection - Basements, Retaining walls, Lift pits, Sumps.

• ●  Decorative Water Features - Swimming pools, Fountains, Water bodies, Canals.

• ●  Utility Areas - Toilets, Sunk slabs.

  Packaging : 15Kg Pack 

Wall Putty - Hard Worker Wall Putty HW310

Walls do not start perfect — they finish perfect with Hard Worker Wall Putty. An even, flawless surface forms a bright white base that evens out lines, pores, and minor undulations. It bonds firmly to plaster or concrete and leaves behind a smooth finish. No paint peeling, no flaking, no cracking, just a clean surface for durable walls. From Interior or exterior walls, plasterboard, commercial buildings to retrofitting and renovation projects, HW310 is the perfect choice for maintenance-free durability.

Applications :

• ●  Finishing & decorating exterior walls

• ●  Finishing & decorating interior walls

• ●  Can be used on concrete, rendered walls, hollow blocks, precast walls & concrete ceilings

  Packaging : 40kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

1. Block Fix - Hard Worker Block Fix HW301

Ramco Cements Ltd manufactures a wide range of construction chemical products that meet stringent

compliances and are tailored for critical applications delivering reliable performance with unmatched

aesthetic finish under the brand name of Hard Worker Engineering Construction Chemical Products

Through Pioneering Research and Innovation

For projects that demand speed and strength, Hard Worker Block Fix is the right choice. Just add water to the ready-to-use formulation. It bonds fast and clean while cutting down on time, effort and material. Just a 10 mm joint delivers high adhesion across red bricks, hollow and fly ash blocks, and stones. No on-site batching required. The result: faster walls, confident masonry, and a finish that holds up through time.

Applications : Suitable for red bricks, hollow and fly ash blocks, and stones Packaging : 40kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

1. Bonding Agent Epoxy - Hard Worker Bonding Agent Epoxy HW403

   Hard Worker Bonding Agent Epoxy is designed to anchor new concrete to old, with a grip that’s meant to stay. Whether it’s overhead patchwork or structural overlays, it holds firm, making sure there’s one no-fail, no-slip solid unit that stays bonded through stress and time. The two-part resin–hardener system creates a dense, cross-linked bond that fuses the old and new concrete into a single structural body.

   Applications - Concrete Repair, Bonding new concrete to old concrete, Masonry Repair and Precast Joints Packaging :4L Kit

1. Bonding Agent SBR - Hard Worker Bonding Agent SBR HW404

   When a new layer holds tight, the whole repair lasts longer. Hard Worker Bonding Agent SBR is a liquid polymer additive used to create a strong bonding coat between old surfaces and new layers of mortar, screed or plaster. Whether it's patch repair or floor topping, this bonding layer grips strong — and stays. Mixed in a 1:1 ratio with cement, the SBR forms a tight bond. Once applied, it locks in the new surface without risk of delamination.

   Applications :

• ●  Beam and Column Joints: Ideal for bonding old and new concrete.

• ●  Micro Concrete Applications: Enhances the bonding between old surface and micro concrete.

• ●  Repair Mortar Applications: Improves bonding and performance in repair mortars.

  Packaging : 1, 5, 10L Packs

1. Bonding Agent SBR - Hard Worker Bonding Agent SBR HW404

   When a new layer holds tight, the whole repair lasts longer. Hard Worker Bonding Agent SBR is a liquid polymer additive used to create a strong bonding coat between old surfaces and new layers of mortar, screed or plaster. Whether it's patch repair or floor topping, this bonding layer grips strong — and stays. Mixed in a 1:1 ratio with cement, the SBR forms a tight bond. Once applied, it locks in the new surface without risk of delamination.

   Applications :

• ●  Beam and Column Joints: Ideal for bonding old and new concrete.

• ●  Micro Concrete Applications: Enhances the bonding between old surface and micro concrete.

• ●  Repair Mortar Applications: Improves bonding and performance in repair mortars.

  Packaging : 1, 5, 10L Packs

1. Bonding Agent SBR - Hard Worker Bonding Agent SBR HW404

   When a new layer holds tight, the whole repair lasts longer. Hard Worker Bonding Agent SBR is a liquid polymer additive used to create a strong bonding coat between old surfaces and new layers of mortar, screed or plaster. Whether it's patch repair or floor topping, this bonding layer grips strong — and stays. Mixed in a 1:1 ratio with cement, the SBR forms a tight bond. Once applied, it locks in the new surface without risk of delamination.

   Applications :

• ●  Beam and Column Joints: Ideal for bonding old and new concrete.

• ●  Micro Concrete Applications: Enhances the bonding between old surface and micro concrete.

• ●  Repair Mortar Applications: Improves bonding and performance in repair mortars.

  Packaging : 1, 5, 10L Packs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 & 40Kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20Kgs

Tile Fix Epoxy - Hard Worker Tile Fix Epoxy HW205

Tiles exposed to thermal movements, harsh chemicals, or constant water exposure need a strong companion - Hard Worker Epoxy Tile Fix is built just for them. This ready to use three-component enhanced adhesive creates a precision bond that grips hard — for walls or floors, indoors or out, and for larger, denser tile types that require stronger grips. From glass and metal to natural stone, it bonds

Ramco Cements Ltd manufactures a wide range of construction chemical products that meet stringent

compliances and are tailored for critical applications delivering reliable performance with unmatched

aesthetic finish under the brand name of Hard Worker Engineering Construction Chemical Products

Through Pioneering Research and Innovation

across all substrates with zero slip, zero shrinkage. The result: a finish that stays firm through stress, traffic, moisture, and time.

Applications

• ●  For big size granite cladding/ external tile, natural stone cladding

• ●  For swimming pool glass mosaics

• ●  Big size Tile on Tile, Tile on Granite, Granite on Granite

• ●  On Drywall, Glass, Wood, Metal, Vinyl floorings

  Packaging :12 Kgs kit

1. Block Fix - Hard Worker Block Fix HW302

Ramco Cements Ltd manufactures a wide range of construction chemical products that meet stringent

compliances and are tailored for critical applications delivering reliable performance with unmatched

aesthetic finish under the brand name of Hard Worker Engineering Construction Chemical Products

Through Pioneering Research and Innovation

For projects that demand speed and strength, Hard Worker Block Fix is the right choice. Just add water to the ready-to-use formulation. It bonds fast and clean while cutting down on time, effort and material. Just a 10 mm joint delivers high adhesion across red bricks, hollow and fly ash blocks, and stones. No on-site batching required. The result: faster walls, confident masonry, and a finish that holds up through time.

Applications : Suitable for red bricks, hollow and fly ash blocks, and stones Packaging : 40kgs

1. Tile Fix - Hard Worker Tile Fix

   Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

   1. HW201 Standard T1 - All Types of Ceramic Tiles

   2. HW202 Medium T2 - Small Format Vitrified Tiles

   3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

   4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

   5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

   Packaging : 20 and 40Kgs

    

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T6 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

1. Tile Grout Epoxy - Hard Worker Tile Grout Epoxy HW211

   Every tile needs a joint it can count on and a colour it can match with, to tell the right story. The Hard Worker Epoxy Tile Grout brings precision, polish, and long-term protection to every joint and tile. It is formulated to withstand continuous contact with water, heat, chemicals, and stains, thus making it the smart, sealed choice for bathrooms, kitchens, hospitals, pools, and more. Available in a wide range of colour shades.

   Applications : Grouting floor and walls, indoors and outdoors and also suitable for a wide range of surfaces- ceramic, glazed, porcelain, vitrified tiles, natural stones, large format tiles, glass mosaic tiles and composites, including engineered stones.

1. Anchoring Grout - Hard Worker Anchoring Grout HW402

   Between the bolt and the base, there’s no room for doubt. Hard Worker Anchoring Grout fills that space with certainty. Whether it’s bolts, plates, turbines or tracks; this non-shrink grout flows deep into gaps and holds firm. Resists oil and water ingress. It fills tight spaces without vibration, grips around the anchor and concrete, and hardens into a monolithic unit that doesn’t shift under both dead and live load. Just a compact, confident fix that stands through stress and time.

   Applications

   • ●  Heavy machinery & equipment foundation

   • ●  Bridge bearing pad grouting & structural columns in pre-cast crane rail construction grouting

   • ●  Boiler foundation

   • ●  Turbine generator bearing plates

   • ●  Windmill foundation grouting.

     Packaging : 25Kgs

1. Tile Grout Epoxy - Hard Worker Tile Grout Epoxy HW211

   Every tile needs a joint it can count on and a colour it can match with, to tell the right story. The Hard Worker Epoxy Tile Grout brings precision, polish, and long-term protection to every joint and tile. It is formulated to withstand continuous contact with water, heat, chemicals, and stains, thus making it the smart, sealed choice for bathrooms, kitchens, hospitals, pools, and more. Available in a wide range of colour shades.

   Applications : Grouting floor and walls, indoors and outdoors and also suitable for a wide range of surfaces- ceramic, glazed, porcelain, vitrified tiles, natural stones, large format tiles, glass mosaic tiles and composites, including engineered stones.

1. Tile Grout - Hard Worker Tile Grout HW210

   Hard Worker Tile Grout is more than a filler; it adds the detail that finishes the tile job. Hard Worker Tile Grout is a cement-based, polymer-modified grout formulated to lock in joints with colour precision and lasting performance. For varied tile types, whether it’s a small ceramic tile or a large-format vitrified floor, it adapts with flexibility, holds firm, and resists daily wear. Available in over 40 shades on demand, it enhances the tilework. Clean lines. Smooth fill. Lasting finish.

   Applications : Hard Worker Tile Grout is ideally recommended for 1 mm to 3 mm joints width. Suitable for grouting a wide range of tiles - mosaic, vitrified tiles, floor tiles, wall, stone and industrial flooring. Packaging : 1Kg pack x 10 units

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

Eco Plaster - Hard Worker Eco Plaster HW305

India’s first self-curing plaster. Hard Worker Eco Plaster completely eliminates water curing. It allows for a perfect, smooth, and even setting, from wall to ceiling.

Applications : Suitable for all mineral substrates (Red Bricks, Concrete & AAC Blocks, Fly-ash Bricks, etc.). Packaging : 25Kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs

Tile Fix - Hard Worker Tile Fix

Tiles are prone to move, fall or break if improperly fixed. Not the ones fixed with Hard Worker Tile Fix. Built for lasting alignment and zero rework, Hard Worker Tile Fix creates a precision adhesive layer between 3 mm - 12 mm thickness. Application thickness depends on the Tile Fix variant and type of tile. This adhesive holds strong across tile types, surfaces and site conditions. From small ceramic floors to heavy stone cladding, it delivers a clean, confident finish that doesn’t shift over time. No prop-up. No edges lifting. Just a finish that stays even with daily wear and movement. 5 Variants are available for different tile applications and are

1. HW201 Standard T1 - All Types of Ceramic Tiles

2. HW202 Medium T2 - Small Format Vitrified Tiles

3. HW203 High T3 - Large Format Vitrified Tiles, Tile-On-Tile

4. HW204 Max T4 - Granite, Marble, Natural Stone, and Cladding

5. HW206 Max-White T4 - Specialized Applications like Fixing Swimming Pool Tiles, Glass Tiles, etc.

Packaging : 20 and 40Kgs